To engage Battery Lock, twist flashlight head counter clockwise until the red ring is fully shown. The flashlight will not operate when in the locked position. To use flashlight light, twist flashlight head clockwise until the red ring is hidden. The flashlight will be unlocked and able to operate normally.
How do I change the battery on my flashlight?
How to Put Batteries in a Flashlight
- Turn the tail cap counterclockwise until it pulls away from the flashlight. …
- Insert a new battery so the top or pointed end faces the light. …
- Replace the tail cap by turning it clockwise until it stops moving.
How do I change the battery in my redline flashlight?
So if you unscrew the base, closest to where the button is (about half an inch from the button) It’ll open to what looks like a silver plate with a few screws on the sides– which is the bottom of the battery pack and slides out of the flashlight to carry the batteries.
How do you load a battery?
Slide the battery into place with the negative end first.
As you insert the negative end of the battery, you may press down a spring or a lever. By installing the negative end first, the battery will slide into the compartment more easily. You should then be able to easily snap the positive end into place.
How do you open a Coleman headlight?
2. To operate headlamp, push the front and rear body until the red area is fully hidden. The headlamp will be unlocked and able to operate as normal (Fig. 6).