Step 1: Insert the G4 halogen light bulb (the 2 pins) vertically into the lamp holder (the 2 holes), push the bulb down gently till the 2 pins reach the end. For longest life, handle halogen bulbs with a cloth or tissue.
Do G4 halogen bulbs need a transformer?
As mentioned before, most of the G4 LEDs operate on DC voltage, so they will need a different power supply or transformer to operate. While all the halogen lights operate on AC, it is very important to check the compatibility of the fixture with the LED light. Both should be either AC or DC, but never different.
Can you swap G4 halogen bulbs with LED?
G4 Bulb Type LEDs are a simple replacement for your G4 Pin Type Halogen Globes. … When using the Disc Type LED replacements you need to determine the pin configuration for your light fitting, these will be either a Side Pin or a Back Pin arrangement.
Are G4 bulbs 12V or 240V?
Our range of G9 bulbs operate off the mains voltage (220-240V), while G4 capsule bulbs are low voltage (usually between 12V and 24V) and need to be installed with a compatible transformer to transform mains voltage into a lower one suitable for the bulb.
How do you install a halogen bulb without touching it?
When changing a halogen light bulb, it’s important not to touch the bulb directly with your fingers. Switch the power source off before removing any protective casing holding the light bulb. Pull the bulb out of the fixture and install the new one by lining up the prongs so they fit inside the grooves.
Can you just swap halogen bulbs for LED?
Yes, in many cases, you can simply replace your bulbs separately, one by one. Furthermore, LEDs can handle all hues of white light, so the warm yellowish light of halogen bulbs is perfectly within reach! …
Are G4 bulbs 12V?
G4 light bulbs are a small light that can run on as little as 12V while maintaining a relatively high lumen output, making G4 light bulbs a popular choice for appliances and small spaces such as cupboards.
Can I mix LED and halogen bulbs in same fixture?
Put simply, you can also mix LED and halogen bulbs together and it’s an easy way to slowly start transitioning your fixtures to energy-saving LED lights. … You will have issues with flickering lights, because the fixture may not be designed to deliver different power levels to different sockets.
Are T3 and G4 bulbs the same?
“12 volt Bi-Pin Halogen Peanut Bulb in the 5, 10 or 20 watt T3 size have the G4 bi-pin base where as the 35, 50, 75, 100 watt T4 size have the GY6. … So, “T” is for Tubular, (but they can also be referred to as the ‘peanut bulb’) and 4 is the diameter.
Why do G4 LED lights flicker?
3 (MR16) and G4 Bulbs usually works from 12 Volts. They need a transformer to convert the mains voltage 230V to 12V. The flickering you are experiencing is usually down to incompatibility or loading issues with the transformer. … This should help with the loading and usually the flickering will disappear.
Do you need to change the transformer for LED lights?
They will have a transformer either in the ceiling or light fitting. Some LED bulbs, like the Philips Master LED range, have in-built circuitry that can deal with most (but not all) transformers, so you don’t have to change them.