Your question: What if my LED lights are too long?

If the LED light strip you bought is too long, you need to cut off the extra part. The first thing you should do is measure the right length. If you accidentally cut the strip too short, your effort will be wasted.

Can you shorten LED Strip Lights?

LED Strip Lights are such a versatile product due to the fact that they can easily be cut on the given cut lines and connected at any point between the copper dots on the LED Strip Lights, cut lengths vary between products. … Use a pair of sharp scissors to cut the LED Strip Light directly down the given cut line.

Can you cut LED Strip Lights to length?

You can, but we wouldn’t recommend it. By cutting an LED strip light anywhere other than the designated cutting point, you run the risk of damaging the components on the strip itself, as well as the circuit board. This may ultimately result in the strip light not working.

Can you change the length of LED lights?

An LED strip light is typically half an inch (10-12 mm) in width, and up to 16 feet (5 meters) or more in length. They can be cut to specific lengths using just a pair of scissors along the cutlines, located every 1-2 inches. … Simply peel off the liner, and mount the LED strip to virtually any surface.

IT IS INTERESTING:  Can Coke clean headlights?

Can LED strip lights cause a fire?

The possibility of led strip lights catching fire is minuscule, even though they are hot to touch. … Incandescent bulbs have a filament that emits excessive heat, the light sources can ignite a fire on overheating, but as LED lights produce light at a lower temperature, they don’t catch fire as easily.

Can you cut Christmas lights?

The lights are designed so each bulb receives all 120 volts and each bulb has a direct route to power, meaning they can be cut to any length without overpowering and burning out bulbs. With the lights unplugged cut wires with wire cutters between the bulbs and cap each end with wire connectors.

Why do you cut LED lights?

Not only will they add extra light to the surroundings but they also look really pretty to the eyes. You just need to measure the length of the wall you want to put them on. Then you simply cut the LED light strip to the length according to the length you measured and you are good to go.

Can you cut Flexible LED Strip Lights?

Inspired LED’s flexible LED strips are a versatile option for almost any accent or task-lighting application. One of the main advantages of flexible LED tape over rigid panels is the ability to cut these strips to custom lengths.

Is 16.4 ft long enough for a room?

Yes, because 16 feet is about a wall to the other wall. In some cases, it can be enough for a bedroom.

HOW LONG CAN LED strip lights stay on?

LEDs have an unbelievably long expected life-span, compared to both incandescent and fluorescent lights. With an average life-expectancy of some 50,000 hours, LED strip lights will still be burning bright in 17 years’ time, long after their traditional counterparts will have expired.

IT IS INTERESTING:  Can I use a higher watt LED equivalent bulb in a 60w fixture?

What is the maximum length of LED strip?

Maximum lengths

LED strips are typically manufactured in 5m reels, as this is roughly the maximum length you can install in one continuous length without getting a voltage drop towards the end of the reel. Any longer, and the LEDs at the end of the reel appear less bright than those close to the power supply.

Can you overlap LED lights?

During installation, make sure flexible light isn’t receiving electricity in any manner. C) Make sure the voltage marked on your light strip matches the LED Driver. D) Do not overlap this product as the overlapping may cause the flexible light to overheat and melt or ignite.

Categories LED